DELL Technologies

Search Results (14.4K)

it measures almost exactly 223mm. EDITED: I made a motherboard fitting to accept the heatsink shroud but the metal bar I used that replaced the round plastic hooks in the heatsink shroud motherboard fitting is beginning to bend so I want to replace it. The Optiplex

Question

•

Desktops General - Locked Topics

5.2K

Community Accepted Solution

Optiplex 620 heatsink compatibility with other systems

I have a Optiplex 780 MT and I want to upgrade the processor, from a core 2 duo e8400 to a core 2 quad q9650, but I have the aluminium heatsink, so I have to change the heatsink with the copper one. I found a cooler with the copper base heatsink, but it comes from a optiplex 620 system. My questio

Question

•

Desktops General - Locked Topics

Where to get the Heatsink for additional M.2 drive,

to install an additional SSD in the second M.2 slot. The existing drive has a copper heatsink fitted and the service manual says to install an additional drive with a heatsink too. Googling for a suitable heatsink all I can find is one on Amazon USA and some in

Question

•

XPS

267

Precision 490 heatsink screws

Anyone know where I can pick up a set of replacement screws for a Dell Precision 490 heatsink? Dell Precision 490 T5400 SC1430 CPU Heatsink JD210

Question

•

Desktops General - Locked Topics

14.3K

Replacement Heatsink and shroud for Precision 390

Hi, Does anyone one know the part numbers for the cpu heatsink and air shroud for the workstation 390 ( i cant find any info regarding part numbers for this machine). Alternatively would the heatsink and shroud from a

Question

•

Desktops General - Locked Topics

6.6K

Vostro 470 - Replacing CPU heatsink fan

I figure why do it if it's not necessary and can cause trouble. So I was wondering if I could replace just the heatsink fan without removing the heatsink. The fan seems to be a stock 80mm fan. Seems that with just a few precautions it should be safe, such

Question

•

Desktops General - Locked Topics

47.1K

Closed

Replace heatsink fan on 3700

Question

•

Laptops General - Locked Topics

1.6K

dimension 9100 heatsink question

Question

•

Desktops General - Locked Topics

4.3K

Community Accepted Solution

Precision T3600 / T5600 / T7600 heatsink alternatives

to this variation the bolts for "normal" heatsinks may not reach or may involve such enormous forces (to resist the heatsink springs) that you may well risk damaging the thread on the chassis mount or heatsink. There are 3 types of LGA2011-0 ILM (X79 or C600

Question

•

Desktops General - Locked Topics

24.4K

Inspiron 5680, heatsink compatibility

I have s Inspiron 5680 that I'm trying to add a heatsink on to the cpu, I7 8700, and I have no idea what is compatible with what. Any advice on a model or how to determine what ones I can use would be much appreciated.

Question

•

Inspiron Desktops

676

CPU heatsink & fan upgraded required?

also purchased a CPU cooler fan upgrade. The chip works great, but the fixture holding the "old" heatsink does not accept the new P4 CPU cooler (fan with Heatsink). I'm running the system with the old heatsink and fan shroud assembly. 1.) Do I run any risk of

Question

•

Desktops General - Locked Topics

14.5K

Would the heatsink 0U016F for T7500 fits as a replacement for the heatsink 0F847J for T410?

I have tried a standard 1366 heatsink on T410. The screw distance does not fit. Can anyone tell me the dimension of the two and also the distance between the screws?

Question

•

Desktops General - Locked Topics

943

Dell Precision 3660 - Cheap Heatsink assembly

Hi, the new Precsiosn 3660 arrived today. All 4 Fans seam a bit noisy (2 in Front, 1 large in Back and Performance CPU FAN). But what makes me uncertain, is the cheap heatsink assembly.The heatsink is mounted only by a simple pin header and a spring. I had a Power Edge Server 2950, where these p

Question

•

Precision Fixed Workstations

1.1K

Dell 8910 Upgrading cpu heatsink

Hi i wanted to know can the heatsink+fan be upgraded to an aftermarket cpu heatsink if so what one would fit i was looking at this one here below www.amazon.com/.../ref=sr_1_1

Question

•

Desktops General - Locked Topics

607

Dell Precision T7910 Heatsink Fan

Are there any quieter fans out there that will fit the Dell Precision T7910 Heatsink, they appear to slot into the heatsink with a few screws 80x80x25mm

Question

•

Precision Fixed Workstations

182

Optiplex GX620: heatsink problems & solution

I hadn't tightened the heatsink screws enough, but never a system shutdown because the heatsink didn't work! The idea sounds preposterous! Anyhow, I'm left with plus one GX620 mobo that'll find a home eventually and minus one SC440 heatsink - which is an easy

Question

•

Desktops General - Locked Topics

24.4K

Heatsink W4254 does not fit in my dimension 8400

I've been having thermal shutdowns so I purchased a new fan and heatsink for my Dimension 8400. When I went to install the new heatsink the base was too large to fit the retention bracket. I need advice: should I return the heatsink and buy another? Or should I buy a new

Question

•

Desktops General - Locked Topics

7.3K

XPS720 heatsink and fan good enough for X6800?

the standard XPS710 heatsink and fan good enough for the X6800 cpu? if not, can I just simply fit any new heatsink and fan (such as an NorthQ water cooler heatsink/fan)? I`ve seen it recommended that a water type should be used

Question

•

Desktops General - Locked Topics

5.7K

Heatsink for 2950 secund CPU

Hi, i have PowerEdge 2950 with 1 cpu i just buy addition cpu and i want to konw if i need the same Heatsink GF449 or its other model ? Regards, Shalom Burla.

Question

•

PowerEdge Hardware General

14.3K

Need help removing cpu heatsink on a 600SC

Question

•

PowerEdge Hardware General

2.5K

No Results found!